Binary Data With Pyserial(python Serial Port)

serial.write() method in pyserial seems to only send string data. I have arrays like [0xc0,0x04,0x00] and want to be able to send/receive them via the serial port? Are there any se

Solution 1:

An alternative method, without using the array module:

defa2s(arr):
    """ Array of integer byte values --> binary string
    """return''.join(chr(b) for b in arr)

Solution 2:

You need to convert your data to a string

"\xc0\x04\x00"

Null characters are not a problem in Python -- strings are not null-terminated the zero byte behaves just like another byte "\x00".

One way to do this:

>>>import array>>>array.array('B', [0xc0, 0x04, 0x00]).tostring()
'\xc0\x04\x00'

Solution 3:

I faced a similar (but arguably worse) issue, having to send control bits through a UART from a python script to test an embedded device. My data definition was "field1: 8 bits , field2: 3 bits, field3 7 bits", etc. It turns out you can build a robust and clean interface for this using the BitArray library. Here's a snippet (minus the serial set-up)

from bitstring import BitArray

cmdbuf = BitArray(length = 50)     # 50 byte BitArray
cmdbuf.overwrite('0xAA', 0)       # Init the marker byte at the head

Here's where it gets flexible. The command below replaces the 4 bits at bit position 23 with the 4 bits passed. Note that it took a binary bit value, given in string form. I can set/clear any bits at any location in the buffer this way, without having to worry about stepping on values in adjacent bytes or bits.

cmdbuf.overwrite('0b0110', 23)

# To send on the (previously opened) serial port 
ser.write( cmdbuf )